DIY Pacifier Clips

Please follow and like us:
cute_rss DIY Pacifier Clips
cute_subscribe DIY Pacifier Clips
cute_fb DIY Pacifier Clips
icon_Visit_us_en_US DIY Pacifier Clips
cute_google DIY Pacifier Clips
icon_Visit_us_en_US DIY Pacifier Clips
http://www.sewverycrafty.com/diy-pacifier-clips/
cute_share DIY Pacifier Clips
cute_pinterest DIY Pacifier Clips
pinterest DIY Pacifier Clips
cute_instagram DIY Pacifier Clips

DIY Pacifier Clips

Pacifier-Clips-300x222 DIY Pacifier Clips

Pacifier Clips

My husband’s cousin is going to have a baby next week so I thought I would make these terrific DIY Pacifier Clips for her.  I am confident that they will come in handy and they are so easy to make.  Just ribbon or scrap fabric, some snaps and mitten clips and you are ready to go.

What you will Need:

  • Ribbon and/or scrap fabric
  • Plastic Snaps and Snap Tool
  • Mitten Clips
  • Fray Check
  • Pacifiers
  • Standard Sewing Supplies
What-you-will-Need-Pacifier-Clips-300x236 DIY Pacifier Clips

What you will Need: Pacifier Clips

Step 1: DIY Pacifier Clips

Decide if you are going to use ribbon or fabric.  If you choose to use fabric, measure a piece that is 4″ x 14″ and cut.  Fold the fabric lengthwise in half and press.  Open up the fabric and fold the short ends in 1/4″ and press.  Fold in the long raw edges and press.  Refold the center so that the raw edges are safely tucked inside.  Top stitch down both sides of the strip.  The strip should now be 1″ wide and 13 1/2″ long.  If you are using ribbon be sure to add fray check to each end to prevent fraying.

Fold-the-Fabric-in-Fours-and-Press-300x140 DIY Pacifier Clips

Fold the Fabric in Fours and Press

Top-Stitch-on-Both-Sides-300x139 DIY Pacifier Clips

Top Stitch on Both Sides

Step 2: DIY Pacifier Clips

Insert one end of the fabric or ribbon through the shank of the mitten clip and sew across the short end anchoring the clip.

Insert-One-End-into-the-Mitten-Shank-300x166 DIY Pacifier Clips

Insert One End into the Mitten Shank

Step 3: DIY Pacifier Clips

Place the male end of the plastic snap about 1/2″ from the other end of the fabric or ribbon and the female end 2 1/4″ from the end and press the snaps into place using the snap tool.

Add-the-Snaps-300x104 DIY Pacifier Clips

Add the Snaps

Step 4: DIY Pacifier Clips

Place the pacifier between the snap pieces and snap together and you have finished your pacifier clips.

Add-the-Pacifier-1024x273 DIY Pacifier Clips

Add the Pacifier

Click here for reuse options!
Copyright 2017 Sew Very Crafty
printfriendly-pdf-button DIY Pacifier Clips
Please follow and like us:
cute_rss DIY Pacifier Clips
cute_subscribe DIY Pacifier Clips
cute_fb DIY Pacifier Clips
icon_Visit_us_en_US DIY Pacifier Clips
cute_google DIY Pacifier Clips
icon_Visit_us_en_US DIY Pacifier Clips
http://www.sewverycrafty.com/diy-pacifier-clips/
cute_share DIY Pacifier Clips
cute_pinterest DIY Pacifier Clips
pinterest DIY Pacifier Clips
cute_instagram DIY Pacifier Clips

Looking Forward to Reading your Thoughts on this Project

Enjoy this blog? Please spread the word :)

%d bloggers like this: